品牌:NTH
ꦍ 1. 适用性于轴类钢件代加工,卡爪拥有赔偿费式夹紧和后拉的功能表,对重点的赔偿费量为5mm。
2. 尾座支柱轴类,卡爪补充夹紧后,把轴类拉向中央一流,依此加工制作后同轴度会极为好。 1. It's suitable for shaft machining, the chuck have the function of compensation clamping and pulling back, the compensation size is 5mm. 2. The tailstock support the shaft, after compensation clamping, the chuck pull the shaft back to center, better concentricity can be made.
UNIT: mm
年纪 Spec |
楔心旅行路线 |
爪往返的直径 |
非常大夹持直徑 |
最窄夹持截面积 |
限制值液压缸扭力
Max.D.B.Pull |
最明显夹持力 |
---|---|---|---|---|---|---|
FWD-06A5 |
16 |
13 |
35 |
6 |
14.7(1500) |
25.0(2550) |
FWD-08A6 |
20 |
18 |
65 |
16 |
19.6(2000) |
34.3(3500) |
规模 Spec
补偿金量
高转速比
多普勒效应矩
权重
更适合液压缸
较大 用气压
FWD-06A5
5
3500
0.5
13
SNK-100
2.1(21)
FWD-08A6
6
3000
0.5
22
SNK-100
2.8(28)
型号规格 Model
Compensation
(mm)
Max RPM
I
kg*m2
Weight
kg
Matched cylinders
Max.pressure
Mpa(kgf/cm2)
外形尺寸 Spec |
A |
B |
C(H6) |
D |
D1 |
D2 |
E |
G |
---|---|---|---|---|---|---|---|---|
FWD-06A5 |
168 |
116 |
140 |
104.8 |
82.56 |
24 |
15 |
4--20 |
FWD-08A6 |
210 |
127 |
170 |
133.4 |
106.38 |
32 |
17 |
9--29 |
规格型号 Spec |
H |
J |
L |
M |
N |
P |
T |
---|---|---|---|---|---|---|---|
FWD-06A5 |
38 |
50 |
52 |
M10x120 |
55 |
14 |
34 |
FWD-08A6 |
38 |
58 |
61 |
M12x125 |
67 |
20 |
41.5 |
💛 备注名称:FWD-06为柔软性杰出,在夹持类件表面时,以公司为系数补正,与此同时能令类件表面接受到横截,容易轴上固定。
꧟ Remark: FWD-06 chuck’s center is spring type, when clamping, it’s based on the center, the workpiece could be pulled onto the position base, so as to make axial postion.
𝄹 使用技術修该的民事权利,恕不据实通知函 Subject to technology changes without prior information
ꦏ 料框业务需求可订做 Non-standard requirements can be made
下一条:FQ 快拆式动力夹头
上一条:FW三爪强力浮动油压卡盘